KP Technology
Kelvin Probes
Kelvin probe systems are specially developed for use in various environments, including ambient conditions, controlled atmospheres, and relative humidity, as well as ultra-high vacuum conditions.
The Hi-Tech catalogueFind the tools.
Find the tools.
Explore the possibilities.
From material preparation to precision measurement. Explore our equipment and materials by application, principal or the challenge you are working on.
100 products. Explore by application.
100 products
Ecopia Corporation
E-beam evaporator system
E-Beam Evaporation, which is a Thermal Evaporation process, and Sputtering are the two most common types of Physical Vapor Deposition or PVD. Of these two processes, The E-Beam Deposition technique has several clear advantages for many types of applications.
Potentiostats
Potentiostats are designed to provided highest level of performance in electrochemical experiments.
Photoelectrochemistry & Photovoltaic (CIMPS)
The CIMPS system is an advanced system for photoelectrochemical/photovoltaics measurements. An additional potentiostat actively controls the light source which allows dynamic measurements like IMPS, IMVS besides standard electrochemical and photoelectrochemical measurements.
Tunable Light Sources
A tunable light source begins with a broadband light source and uses a monochromator to allow the user to freely select and output only the desired wavelengths of interest.
FTIR Spectrometers
FTIR spectrometers are a robust method to characterize reflection, transmission, and absorption of light within the wavenumber range from 14000/cm to 400/cm.
Monochromators and Spectrographs
A monochromator separates incoming light into its component wavelengths, selecting only a very narrow bandwidth of interest to output.
Quantum Efficiency Measurement System
The quantum efficiency (QE) of a device is a measure of its ability to convert incoming photons into electrons or other charge carriers.
MTI Corporation
Steady-State AAA Solar Simulator
300 W Xe lamp with optical reflector Beam size: 50 mm × 50 mm Standard outboard sample stage with one IC clip Irradiance intensity: up to 1500 W/m2 @ AM1.5G Irradiance mode: horizontal or vertical
Semetrol, LLC
Deep Level Transient Spectroscopy (DLTS)
DLTS data acquisition and analysis software (DLTS, ODLTS, DDLTS) Hardware and software for current voltage temperature IVT, I-DLTS, PICTS data acquisition and analysis software Computer and monitor Closed cycle helium cryostat ( 25-650K) Temperature controller
Ecopia Corporation
LED Tester
LED tester is good to measure both electrical(I-V curve) and optical(Spectra, Light intensity) properties of LED chip, LED lamp, SMD type at the same time. It also makes it possible to see LED sample’s construction , seeing through microscope.
Ecopia Corporation
Probe Station
Probe station is mechanical instrument to make it possible to move probe arm and tip precisely, and have them contact on the semiconductor device and wafer successfully. Probe station is used to get electrical properties of semiconductor samples, i.e IV, IR of semiconductor wafer and device by integrating with measurement unit. It helps probe tip end probing in micro distance and contact on the sample surface by using microscope and manipulator ( positioner )
Ecopia Corporation
Hall Effect Measurement System
Hall Effect Measurement System is very useful for measuring Carrier Concentration, Mobility, Resistivity and Hall Coefficient that should be pre-checked in order to grasp the electrical specifications of semiconductor device. Therefore, it is essentially required system to understand the electrical characteristics of semiconductor device.
MTI Corporation
Gas Purification System
An automatic recirculating moisture and oxygen purification system, which can provide an environment with moisture and oxygen concentration lower than 1 ppm for the standard glove box.
MTI Corporation
Desk-Top X-Ray Instruments
This desktop X-Ray machine provides the ideal solution for crystal research labs, substrate manufacturers, and wafer quality control facilities.
MTI Corporation
Melting and Casting
Melting and casting equipment for materials research. Contact our team to discuss the process and configuration for your application.
MTI Corporation
Vacuum Ovens
Vacuum ovens for controlled laboratory drying and heat treatment. Temperature and chamber size depend on the model.
MTI Corporation
Heating Plate and Stirring Plate, Max. 600C
Laboratory heating and stirring plates for sample preparation. Contact our team for model-specific temperature and configuration details.
MTI Corporation
Crystal Growth System
The crystal grower is designed for growing the single crystal of high-temperature metallic alloy up to 3000°C
MTI Corporation
Atmosphere Controlled Hot Press
Vacuum hot lamination hot press designed for wafer bonding, thin-film transformations, and LCP lamination with a heating area 100 mm x 100 mm or 300 mm x 300 mm. It has the max. the working temperature of 500 ºC along with the max. the pressure of 20-40 Metric Tons.
MTI Corporation
Hot Flat & Pellet Press
The temperatures of the heated platens are controlled by a digital temperature controller up to 200°C. The hot press is designed for preparing electrodes & electrolytes of solid and flexible lithium batteries.
MTI Corporation
Hydraulic & Electric Lab press
The lightweight and fully airtight design make it extremely well-suited for operation inside of a glove box where having an inert environment is crucial to prevent unwanted sample contamination.
MTI Corporation
Polishing Machines
It can be used as a standard grinding and polishing machine for preparing metallographic samples as well.
MTI Corporation
Diamond Blade Saws
It is the perfect tool for cutting/dicing/slicing all kinds of materials up to 32.5 mm thickness, especially for brittle crystals, ceramics, TEM samples, and even plastic samples.
MTI Corporation
Diamond Wire Saw
It is an ideal cutting tool for material research, TEM sample preparation, and IC failure analysis.
MTI Corporation
Automatic 3D Printer Coater
Equipment for printing and coating in battery and materials research. Contact our team to discuss the available configuration.
MTI Corporation
Electrospinning Coating
Electrospinning of Nanofibers from Polymer Solutions and Melts Transparent air filter for high-efficiency PM2.5capture Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries
MTI Corporation
Spin Coaters
Compact spin coater with vacuum chucks designed for easy and quick coating via sol-gel for wafers up to 4″. The spinning speed is variable from 500-8000 rpm with two programmable segments
MTI Corporation
CSS & Thermal Evaporation Coaters
Thermal evaporation has a number of limitations including evaporation temperature, the composition of alloys and compounds and life of the source. Recently, thermal evaporation has found numerous applications for depositing organic materials such as OLED (Organic light emitting diodes).
MTI Corporation
Plasma Sputtering Coaters
For the best film-substrate adhesion strength. Compact three rotary target plasma sputtering coater with a touch screen digital controller, and a substrate heater capable of heating up to 500 °C.
MTI Corporation
Dip Coater with Drying Chamber
It is designed for R&D Lab to prepare various optical or epitaxial films from liquid solutions.
MTI Corporation
SILAR Coater
The technique involves multiple dipping of the substrate in a given solution and D.I. water, both temperatures can be varied from case to case.
MTI Corporation
DIP COATER
Desktop Dip Coater designed for R&D Lab to prepare various optical or epitaxial films from a liquid solution.
MTI Corporation
Ultrasonic Spray Coating
Cost-effective ultrasonic Spin-Spray Coater for liquid-phase, ultra-uniform coating process on a large substrate up to 12″
MTI Corporation
Chemical Vapour Deposition (CVD) Furnace System
The PE-CVD furnace is an ideal and affordable tool to deposit thin films or grow nanowire from a gas state (vapor) to a solid-state
MTI Corporation
Rapid Thermal Processing(RTP) Furnaces
Rapid thermal processing furnaces for controlled heating in materials research. Contact us for model-specific temperature and process details.
MTI Corporation
Tube Furnaces (1- 7 Zones)
It is an excellent furnace for sample annealing, diffusion, and sintering in the various gas atmosphere up to 1200°C
MTI Corporation
Muffle Furnaces (400-2500°C)
It is an ideal tool for materials annealing and sintering in your research laboratory.
MTI Corporation
Vacuum Pen
Vacuum pick-up pens for handling small components, chips and wafers. Contact us to discuss the appropriate model for your application.
Benchtop Autoclaves
Designed specifically for the steam sterilization of laboratory research tools, the BioClave™ benchtop autoclaves offer space-saving exterior dimensions while maintaining large internal stainless steel chambers to accommodate a variety of liquids, media, instruments, glassware, plasticware, and other common research laboratory items.
Plasma/UV-Zone Cleaners
Plasma cleaning involves the removal of impurities and contaminants from surfaces through the use of an energetic plasma created from gaseous species. Gasses such as argon and oxygen, as well as mixtures such as air and hydrogen/nitrogen.
Metallurgical Microscope
A metallurgical microscope, also known as a metallographic microscope, or simply as a metallograph, has the distinct capability of imaging a smooth metallic, ceramic, silicon wafer, or other flat polished surface. These epi-illumination instruments allow light to go through the microscope objective, and reflect off the metallic or opaque specimen, and back to the eyepieces.
Biological Light Microscope
The Digital BA310 is a superior microscope meeting the rugged demands for daily work needs in a Professional laboratory setting. The Digital BA310’s 30W illumination provides the user with a powerful and adjustable light source to meet both delicate and detailed lighting requirements for all sample types.
Humidity Chambers
80-liter Programmable Thermal Test Chamber for the thermal test of Rechargeable Battery & Battery Pack according to UN38.3 (38.3.4.2) and other thermal tests from -75ºC to +150ºC at faster heating and cooling rate.
Digital Lab Balances
Excellent for weighting chemicals before mixing. Can be used for monitoring weight change of sample before and after sintering.
PELCO® Slurry Mat
Dimpler™ from damage due to slurry overrun, the PELCO® Slurry Mat™ is made of chemical-resistant silicone rubber. It acts as a catch for small volumes and a drain for larger volumes of used slurry. Pair the Slurry Mat™ with a beaker or other vessel of your choice.
Brain Matrices
These high quality Brain Matrices are designed for freehand slicing of discrete regions of the brain. They allow slicing of either coronal or sagittal sections through the brain at intervals of 1mm and of 2mm for large brains.
Mini Centrifuge
The Gusto is a compact, high speed centrifuge for mini centrifuge tubes. It is ideal for protocols calling for high spin speeds. It is ideal for PCR®, microfilter cell separation, clinical and diagnostic applications, and HPLC protocols.
MicroSlicer
The DosakaNeoLinearSlicer® and MicroSlicer® facilitate cutting of sections of soft tissues like brain, liver or similar difficult-to-section material. These vibratory tissue slicers are well known for their quality and superior performance, enjoying an excellent reputation in the neuroscience research community.
Slice Master
SliceMaster Micro Sample Preparation Tools are compact instruments that can easily cut thin sections from 10 to 200µm. These thinly sliced specimens may be viewed with a microscope. These instruments are simple to set-up for thin section preparation for specimens such as polypropylene bottles and multi-layer paper cartons.
Sputter Coater
Sputter Coater from Cressington offers real solutions to the problems encountered when coating difficult samples for FESEM imaging. FESEM applications need extremely thin, fine-grained, uniform coatings to eliminate charging and to improve contrast on low density materials.
MTI Corporation
Doctor-Blade Film Coater
It has a unique driving system to produce a smooth coating on all types of materials
MTI Corporation
Glove Box
It is integrated with vapor pressure control system, gas purification system, automatic gas regeneration control system, auto alarm, and system data log recording. VGB-6-II is widely used in preparing nanomaterials, Li-ion battery materials, catalysts, and metallorganics.
MTI Corporation
Drying
Dual Vacuum oven with a mobile cart. It is perfectly designed for battery cathode and anode materials storage and baking during battery fabrication.
MTI Corporation
Spot Welding
Pneumatic Single Point Welding Machine is specifically designed for professional Li-ion Battery Research. It is mainly used for welding the cylinder core’s negative terminal (Nickel tab) to the bottom of the cylinder case. A Diameter 2mm x 180mm length welding needle is easily inserted into the cylinder case to weld at the bottom.
MTI Corporation
Slitting Machine
Semi-automatic slitting machine (roll slitting) for preparing electrode of cylinder batteries in R&D laboratories.
MTI Corporation
Grooving Machine
Semi-automatic grooving equipment for cylindrical battery cases. Compatible cell sizes and tooling depend on the selected model.
MTI Corporation
Crimping / De-Assembling
Hydraulic crimpers for sealing a large diameter of the cylindrical cell, such as 4680, 4695, 46100, 46120, and 50100. Two sealing machines are included for three times sealing. The first crimping machine is used for the cap crimping and smooth edges
MTI Corporation
Calendering
Automatic Battery Electrode Rolling Press System with precision digital pressure control in a compact footprint that is less than 6’x6′. It integrates tension controlled feeding and winding devices together with Pressure Controlled Electric Rolling Machine to achieve attention-free electrode rolling & pressing up to 75 meters long with the 300mm max-width.
MTI Corporation
Mixing
Planetary Ball Mill designed for mixing, fine grinding, and preparing small-volume high-tech material production, which features small volume, high efficiency, low noise, and Lock clamps.
MTI Corporation
Slot Die Coaters
It is an excellent tool to research film coating for OLED, perovskite solar cells, and fuel cell proton exchange membranes.
MTI Corporation
Electrolyte Injection
Device for the liquid injection of lithium-ion batteries and supercapacitors.
MTI Corporation
Winding Machine
Semi-automatic winder for winding electrodes and separators together in the research of Li-ion pouch batteries.
MTI Corporation
Stacking
Semi-auto stacking machine with advanced features to ensure a stable, repeatable and precise electrode stacking. In its “Z” fashion stacking method, Anode and Cathode electrodes are alternately stacked with the separator film in between.
MTI Corporation
Slitting Machine
Automatic slitting / trimming machine mainly used for the coated electrode edge cutting in order to prepare the single strip of electrodes of cylindrical or pouch batteries in R&D laboratories.
MTI Corporation
Die Cutting
Die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box
MTI Corporation
Cell Sealing
It is designed for Li-S pouch cell preparation in glove-box for space-saving. Preliminary sealing top and side of the pouch cell before electrolyte injection vacuum sealing for the pouch case after injection of electrolyte in the glove box vacuum standing for the electrolyte diffusion and degassing
MTI Corporation
Case/Cup Forming Machine
Cup forming machine used in the production line of making pouch cell batteries.
MTI Corporation
Metal Welder
Ultrasonic metal welder with a color touch-screen controller. It is designed for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion pouch cells in R&D laboratories.
MTI Corporation
Battery Analyzer
Battery analyzers for charging and discharging tests. Current and voltage ranges depend on the model and configuration.
MTI Corporation
Electric Hot Rolling Press
Compact hot rolling cylinder press with a 100°C max working temperature for preparing battery electrodes(glove box compatible). The high torque DC motor is Ar gas compatible.
MTI Corporation
Disc Cutter
Compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm. This tool is manually operated and is designed for cutting round discs of battery electrodes and separator film (<30um).
MTI Corporation
Tape Casting Coater
Compact tape-casting coater with various heating designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials.
MTI Corporation
Electric Crimper
The crimper is suitable for sealing various types of coin cells such as CR2032, CR2025, and CR2016 with an included die. It can also crimp CR2325, CR2450, AG3, AG5, and other special size cases with optional die sets.
MTI Corporation
Wet Mixing
Produce coating slurry by mixing a small batch of chemicals and compounds in two tanks of 150 ml & 500 ml under vacuum. It has a built-in pump that can vacuum the mixing container to -0.08Mpa and a mixing speed of 320rpm.
MTI Corporation
Lithium Foil For Li-Ion Battery R&D
Lithium metal foil for lithium-ion battery research. Contact our team to confirm specifications, handling requirements and availability.
MTI Corporation
Single Side Conductive Carbon Coated Aluminum Foil: Li-Ion Battery Cathode
Single-sided carbon-coated aluminium foil used as a current collector for lithium-ion battery cathode research.
MTI Corporation
Double Sides Conductive Carbon Coated Copper Foil For Battery Anode Substrate
Double-sided carbon-coated copper foil used as a current collector for lithium-ion battery anode research.
MTI Corporation
Double Sides Conductive Carbon Coated Aluminum Foil For Lithium Battery Cathode
Double-sided carbon-coated aluminium foil used as a current collector for lithium-ion battery cathode research.
MTI Corporation
18650 Li-Ion Battery Cathode Strips – Aluminum Foil Coated by LiMn2O4
Lithium manganese oxide (LiMn2O4) coated aluminium electrode strips for 18650 lithium-ion battery research.
MTI Corporation
Single Side Aluminum Foil Coated with LiMn2O4: Li-Ion Battery Cathode
Single-sided lithium manganese oxide (LiMn2O4) coated aluminium foil for lithium-ion cathode research.
MTI Corporation
Li-Ion Battery Cathode: Aluminum Foil Single Side Coated by Li-NCM (5:2:3)
Single-sided NCM-coated aluminium foil for lithium-ion battery cathode research. Contact us to confirm composition and specifications.
MTI Corporation
Li-Ion Battery Cathode: Aluminum Foil Single Side Coated by LiCoO2
Single-sided lithium cobalt oxide (LiCoO2) coated aluminium foil for lithium-ion battery cathode research.
MTI Corporation
PVDF (Polyvinylidene fluoride) Binder For Li-Ion Battery Electrodes
PVDF binder helps hold active materials and conductive additives together in lithium-ion battery electrodes and supports adhesion to the current collector.
MTI Corporation
PTFE (Polytetrafluoroethylene) Condensed Liquid Binder For Li-Ion Battery
PTFE (Polytetrafluoroethylene) Condensed Liquid Binder For Li-Ion Battery PTFE binds active materials and conductive additives in battery electrodes. It is a key component in the slurry. Highly resistant to chemical degradation from electrolytes and solvents. Provides excellent mechanical integrity and thermal stability. PTFE has good electrochemical stability.
MTI Corporation
SBR (Styrene-Butadiene Rubber) Binder For Li-Ion Battery Anode
SBR (Styrene-Butadiene Rubber) Binder For Li-Ion Battery Anode SBR is a water-based binder used to prepare anode electrodes for Lithium-Ion batteries. Such binder is characterized by Strong adhesion and high aging-retardant. Compatible with a range of electrode materials and a cost-effective choice.
MTI Corporation
CMC (Carboxymethyl Cellulose) Binder For Li-Ion Battery Anode
Carboxymethyl cellulose (CMC) is used as a thickener and binder component in water-based lithium-ion battery electrode slurries.
MTI Corporation
SUPER C45 Conductive Carbon Black as Conductive Additive
SUPER C45 conductive carbon black is used as an additive in lithium-ion battery cathodes and anodes.
MTI Corporation
SUPER C65 Conductive Carbon Black
SUPER C65 conductive carbon black is used as a conductive additive in lithium-ion battery electrodes.
MTI Corporation
Super P Conductive Carbon Black
Super P conductive carbon black is used as a conductive additive in battery electrodes.
MTI Corporation
Conductive Acetylene Black For Li-Ion Battery Anode/Cathode
Conductive Acetylene Black For Li-Ion Battery Anode/Cathode It is used for preparing Li-ion battery electrode material and conducting material.
MTI Corporation
Hard Carbon Powder For Lithium & Sodium-Ion Battery Anode
Hard carbon powder for lithium-ion and sodium-ion battery anode research. Contact us for specifications and availability.
MTI Corporation
Natural Graphite Powder For Li-Ion Battery Anode
Natural graphite powder for lithium-ion battery electrode research. Contact us to confirm grade and intended application.
MTI Corporation
Artificial Graphite Powder For Lithium-Ion Battery Anode
Artificial graphite powder for lithium-ion battery anode research. Contact us to confirm grade and specifications.
MTI Corporation
MCMB (Mesocarbon Microbeads) Graphite Powder For Li-Ion Battery Anode
Mesocarbon microbeads (MCMB) graphite powder for lithium-ion battery anode research.
MTI Corporation
LiMn2O4 (Lithium Manganese Oxide) Powder For Li-Ion Battery Cathode
Lithium manganese oxide (LiMn2O4) powder for lithium-ion battery cathode research.
MTI Corporation
Lithium Carbonate (Li2CO3) Powder for Battery Materials
Lithium carbonate (Li2CO3) powder used in the preparation of lithium-ion battery cathode materials.
MTI Corporation
LiCoO2 (Lithium Cobalt Oxide) Powder For Li-Ion Battery Cathode
Lithium cobalt oxide (LiCoO2) powder for lithium-ion battery cathode research.
Scientific equipment for laboratories across India.
Explore equipment and materials by research area, then discuss your application with Hi-Tech Scientific.